Via candossino 6, 10010 Burolo (TO) – Italy
+39 0125 675711
info@pluritec.com
www.pluritec.it
Where we are

TECHNOLOGY

01
LINEAR MOTORS ON ALL AXES

Our machines are equipped with high quality and high speed maintenance free  linear motors

02
HD VISION Camera

Our high definition camera with adaptive multicolor lighting system perfectly works with different surface refractions

03
Depth controlled DRILLING ROUTING

Multiple depth control systems for drilling and routing are ready for different applications requirements.

04
SPINDLES

The most recent range of synchronous and asynchronous motors spindles are available to meet the most demanding applications. Double spindle head with dedicated spindles for drilling and routing.

05
X-ray TECHNOLOGY

Leading x-ray solutions for optimized tooling holes and data collection from inner layer to   sub lam, sequential build up and multilayers

06
ONE STEP X-Ray DRILLING AND ROUTING

Leading technology for high end application to use real time x-ray targets detection and patterns optimization for drilling and routing

SPINDLES

SPINDLE
MOTOR
MAX SPEED
APPLICATION
NOTE
Air bearing synchronous 250krpm micro-drilling full range
Air bearing asyncronous 200krpm micro-drilling full range
Air bearing asyncronous 180krpm drilling/routing full range
Air bearing asyncronous 150krpm drilling/routing full range
Air bearing asyncronous 125krpm drilling/routing full range
Air bearing syncronous 120krpm drilling/routing full range
Air bearing asyncronous 80krpm drilling/routing full range
Ball bearing syncronous 60krpm routing full range
Ball bearing syncronous 55krpm routing full range

MULTI-LAYERS REGISTRATION

DEVICE
TARGET LOCATION
M/L TYPE
ACCURACY
APPLICATION
HD CCD Camera surface all good drilling / routing registration – flip drilling
Smart Camera surface+inner-layers up to 8/10 layers good drilling / routing registration
X-Ray Camera inner-layers all best drilling / routing registration – flip drilling – sequential built up –  back drilling

DEPTH CONTROL

DEVICE
ACCURACY
APPLICATION
CONTACT ±10µ blind bias – buried holes – back drilling – flip drilling – pocket routing
LINEAR SCALE ±25µ blind bias – buried holes – back drilling – flip drilling – depth controlled routing – pocket routing
MAPPING ±12µ blind bias – buried holes – back drilling – flip drilling – pocket routing

MODEL

MODEL COMBO L COMBO HPL INSPECTA S1-SX INSPECTA TWIN
Use driller & optimizer driller & optimizer post-lam/etch optimizer post-lam/etch optimizer
One Step Drilling yes yes no no
Multi layers tooling yes yes yes yes
Inner layers tooling yes yes yes yes
# stations 1 1/2 1 1
# heads  1 2 1 1
# spindles 1 2 1 2
Working area drilling 1390x835mm (55.00×32.50″) 760x835mm (30.00″x32.50″) 1220x835mm (48.00×32.90″) 760x835mm (30.00″x32.90″)
Large version 1260x950mm (49.00×37.40″) 760x950mm (30.00×37.40″) 1220x950mm (48.00×37.40″) 760x950mm (30.00×37.40″)
Working area inspection 760x690mm (30.00×27.00″) 760x690mm (30.00×27.00″) 760x690mm (30.00×27.00″) 760x690mm (30.00×27.00″)
Large version 760x950mm (30.00×37.40″) 760x950mm (30.00×37.40″) 760x950mm (30.00×37.40″) 760x950mm (30.00×37.40″)
Tooling type vacuum/pin-lock/plugs vacuum/pin-lock/plugs vacuum vacuum
Holes position/diameter/quantity no limitation no limitation no limitation no limitation
Drilling/Routing version yes yes no no
Spindles available all all all all
Depth control system contact/linear contact/linear n.a. n.a.
Depth control accuracy ±15µ/±25µ ±15µ/±25µ n.a. n.a.
Tool change automatic automatic automatic automatic
Max tools per spindle 1290 1290 140 140
Laser station for tool height diam. run out tool height diam. run out n.a. n.a.
Registration systems:
X-Ray camera 1 1 1 1
X-ray source 1 1 1 1
Surface camera yes yes no no
Smart camera yes yes no no
Driving system:
Linear motors xyz yes yes yes yes
XY Speed 80 m/min 80 m/min 80 m/min 80 m/min
Z speed 30 min/m 30 min/m 30 min/m 30 min/m
Position accuracy 0.005mm (0.0002″) 0.005mm (0.0002″) 0.005mm (0.0002″) 0.005mm (0.0002″)
Drilling accuracy ±0.015mm (±0.0006″) ±0.015mm (±0.0006″) ±0.015mm (±0.0006″) ±0.015mm (±0.0006″)
Control Unit windows base windows base windows base windows base
Automatic loading unloading yes yes yes yes
Rear unloading yes yes yes yes
Air requirement 7 bar(102 psi) 7 bar(102 psi) 7 bar(102 psi) 7 bar(102 psi)
Total weight 3100kg(6800lb) 3100kg(6800lb) 3200kg(7000lb) 3200kg(7000lb)

X-RAY COORIDNATES MEASURING

MODEL X-MEASURE X-VISION
Use coordinate measuring / quality control quality control
# stations 1 1
X-Ray camera 1 high definition 1 high definition
X-Ray source 1 micro focus 1 micro focus
Working area 635x760mm (25.00×30.00″) front/rear opening
Large version on request on request
Tooling type multi zone vaccum inox table
Linear motors xyz manual
XY Speed 80 m/min manual
Position accuracy 0.005mm (0.0002″) manual
Control Unit windows base windows base
Air requirement 7 bar(102 psi)
Total weight 3000kg (6560lb) 150kg(330lb)

SMALL LOTS DRILLING | ROUTING

MODEL EVO1 C1 C-Flex C2 D2-D2iX
Use prototype / quick-turn prototype / quick-turn prototype / quick-turn quick-turn/small batches quick turn/small batches
# stations 1 1 1 2 2
# heads 1 1 2 2 2
# spindles 1/2 1/2 2 2 2
Double spindle yes yes no no no
Working area 630x765mm (24.80×30.00″) 1390x760mm (55.00×30.00″) 915x760mm (36.00×30.00″)  630x760mm (25.00×30.00″) 560x700mm (22.00×27.50″)
Large version 630x910mm (24.60×36.00″) on request 915x915mm (36.00×36.00″) on request on request
Tooling type v-block or plugs v-block or plugs v-block or plugs v-block or plugs v-block or plugs
Drilling version yes yes yes yes yes
Drilling/Routing version yes yes yes yes yes
Metal routing version yes yes yes yes yes
Spindles available all all all all all
Depth control system contact/linear contact/linear contact/linear contact/linear contact/linear
Depth control accuracy ±15µ/±25µ ±15µ/±25µ ±15µ/±25µ ±15µ/±25µ ±20µ/±30µ
Tool change automatic automatic automatic automatic automatic
Max tools per spindle 1290 1290 1290 1290 242
Laser station for tool height diam. run out tool height diam. run out tool height diam. run out tool height diam. run out tool height diam. run out
Registration systems:
Camera yes yes yes yes yes
Smart camera yes yes yes yes no
X-Ray no no no no no
Driving system:
Linear motors xyz yes yes yes yes yes
XY Speed 80 m/min 80 m/min 80 m/min 80 m/min 80 m/min
Z speed 30 min/m 30 min/m 30 min/m 30 min/m 30 min/m
Position accuracy 0.005mm (0.0002″) 0.005mm (0.0002″) 0.005mm (0.0002″) 0.005mm (0.0002″) 0.005mm (0.0002″)
Drilling accuracy ±0.015mm (±0.0006″) ±0.015mm (±0.0006″) ±0.015mm (±0.0006″) ±0.015mm (±0.0006″) ±0.015mm (±0.0006″)
Control Unit windows base windows base windows base windows base windows base
Automatic loading unloading yes yes yes yes no
Air requirement 7 bar(102 psi) 7 bar(102 psi) 7 bar(102 psi) 7 bar(102 psi) 7 bar(102 psi)
Total weight 3400kg (7450lb) 5500kg (12330lb) 5600kg (12330lb) 5600kg (12330lb) 5600kg (12330lb)

MASS PRODUCTION DRILLING | ROUTING

MODEL D6-XL D6
Use medium/large batches medium/large batches
# stations 6 6
# heads 6 6
# spindles 6 6
Double spindle no no
Working area 670x700mm (26.00×30.50″) 560x700mm (22.00×27.50″)
Large version on request on request
Tooling type v-block or plugs v-block or plugs
Drilling version yes yes
Drilling/Routing version yes yes
Metal routing version yes yes
Spindles available all all
Depth control system contact/linear contact/linear
Depth control accuracy ±15µ/±25µ ±15µ/±25µ
Tool change automatic automatic
Max tools per spindle 242 242
Laser station for toll height diam. run out tool height diam. run out
Driving system:
Linear motors xyz yes yes
XY Speed 80 m/min 80 m/min
Z speed 35 min/m 35 min/m
Position accuracy 0.005mm (0.0002″) 0.005mm (0.0002″)
Drilling accuracy ±0.018mm (±0.0007″) ±0.018mm (±0.0007″)
Control Unit windows base windows base
Air requirement 7 bar(102 psi) 7 bar(102 psi)
Total weight 14000kg (30800lb) 14000kg(30800lb)